TIRE BOOSTER

With the TIRE BOOSTER, tubeless tire assembly can be accomplished easily. Even without a compressor. With a power of up to eleven bar every tire immediately seats itself safely on the rim and K275:L277seals everything evenly. If you need an even bigger flow of air, a special adapter is also available. The 435 g light, handy cylinder is the perfect remedy for every tubeless tire assembly, whether at home or on your trips.Only for SV valves.

from US$100.94* RRP

Tire Levers

Makes changing tires a snap. The new shape and surface of the tire lever makes the assembly and disassembly of a tire more enjoyable. For both tires and hands too!The new tire levers are especially helpful in difficult assembly operations. Clip it onto the rim, to fix the already mounted section of the tire, and it won‘t slide out when the last section is levered onto the rim.Patent PendingThe colour blue is a trademark of Park Tool for bicycle tools and is used under license.

from US$4.86* RRP

TUBELESS RIM TAPE

Width: 29 mm

The tubeless rim tape is extremely user friendly and at the same time very high pressure resistant. Even on road bikes a single ply of tape is sufficient. Only use wheels that have been specifically approved by the manufacturer for Tubeless conversion. Especially with the high-pressure demands on race bikes this is very important. Only the wheel maker’s approval ensures that the rim is up to the particular stresses in operation and the tubeless tire will be secure. All important information and advice about Tubeless can be found at: www.schwalbetires.com/tubeless-technology/

from US$37.08* RRP

TUBELESS VALVE

Valve length: 40 mm

The Tubeless Valves are available in the stem lengths of 40mm, 60mm, 100mm and are a breeze to fit. There is a suitable valve solution for every rim depth. The valve base can be securely mounted in the rim with a key(4mm) without over tightening. The shortened cone ensures a low installation height and thus more space for the the tire beads. Thanks to the large valve inner diameter (4mm), the tire can be inflated with air and sealing fluid particularly effectively.

from US$29.87* RRP

DOC BLUE PROFESSIONAL 60ML

IDEALLY SUITED FOR TUBELESS CONVERSIONS. Produced by the tubeless specialists from Stan’s NoTubes! Doc Blue Professional is our recommendation for use with Schwalbe TLE tires and guarantees easy handling and optimum, fastest sealing.60-ml-BottleHOW TO USE For preventive puncture protection and tubeless conversion. Filling quantities: tires from 23 - 60 mm -> 60 - 90 ml / tire, from 62 -100 mm -> 90 -120 ml / tire. Shake well! Effective up to 7 months. Unsuitable for significant defects (cuts/bursts). Tubeless conversion only with wheels and tires suitable for tubeless applications.

from US$9.50* RRP

EASY FIT 50ML

Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply - without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes!

from US$7.87* RRP

TIRE BOOSTER

With the TIRE BOOSTER, tubeless tire assembly can be accomplished easily. Even without a compressor. With a power of up to eleven bar every tire immediately seats itself safely on the rim and K275:L277seals everything evenly. If you need an even bigger flow of air, a special adapter is also available. The 435 g light, handy cylinder is the perfect remedy for every tubeless tire assembly, whether at home or on your trips.Only for SV valves.

from US$100.94* RRP

Tire Levers

Makes changing tires a snap. The new shape and surface of the tire lever makes the assembly and disassembly of a tire more enjoyable. For both tires and hands too!The new tire levers are especially helpful in difficult assembly operations. Clip it onto the rim, to fix the already mounted section of the tire, and it won‘t slide out when the last section is levered onto the rim.Patent PendingThe colour blue is a trademark of Park Tool for bicycle tools and is used under license.

from US$4.86* RRP

TUBELESS RIM TAPE

Width: 29 mm

The tubeless rim tape is extremely user friendly and at the same time very high pressure resistant. Even on road bikes a single ply of tape is sufficient. Only use wheels that have been specifically approved by the manufacturer for Tubeless conversion. Especially with the high-pressure demands on race bikes this is very important. Only the wheel maker’s approval ensures that the rim is up to the particular stresses in operation and the tubeless tire will be secure. All important information and advice about Tubeless can be found at: www.schwalbetires.com/tubeless-technology/

from US$37.08* RRP

TUBELESS VALVE

Valve length: 40 mm

The Tubeless Valves are available in the stem lengths of 40mm, 60mm, 100mm and are a breeze to fit. There is a suitable valve solution for every rim depth. The valve base can be securely mounted in the rim with a key(4mm) without over tightening. The shortened cone ensures a low installation height and thus more space for the the tire beads. Thanks to the large valve inner diameter (4mm), the tire can be inflated with air and sealing fluid particularly effectively.

from US$29.87* RRP

DOC BLUE PROFESSIONAL 60ML

IDEALLY SUITED FOR TUBELESS CONVERSIONS. Produced by the tubeless specialists from Stan’s NoTubes! Doc Blue Professional is our recommendation for use with Schwalbe TLE tires and guarantees easy handling and optimum, fastest sealing.60-ml-BottleHOW TO USE For preventive puncture protection and tubeless conversion. Filling quantities: tires from 23 - 60 mm -> 60 - 90 ml / tire, from 62 -100 mm -> 90 -120 ml / tire. Shake well! Effective up to 7 months. Unsuitable for significant defects (cuts/bursts). Tubeless conversion only with wheels and tires suitable for tubeless applications.

from US$9.50* RRP

EASY FIT 50ML

Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply - without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes!

from US$7.87* RRP

TIRE BOOSTER

With the TIRE BOOSTER, tubeless tire assembly can be accomplished easily. Even without a compressor. With a power of up to eleven bar every tire immediately seats itself safely on the rim and K275:L277seals everything evenly. If you need an even bigger flow of air, a special adapter is also available. The 435 g light, handy cylinder is the perfect remedy for every tubeless tire assembly, whether at home or on your trips.Only for SV valves.

from US$100.94* RRP

Tire Levers

Makes changing tires a snap. The new shape and surface of the tire lever makes the assembly and disassembly of a tire more enjoyable. For both tires and hands too!The new tire levers are especially helpful in difficult assembly operations. Clip it onto the rim, to fix the already mounted section of the tire, and it won‘t slide out when the last section is levered onto the rim.Patent PendingThe colour blue is a trademark of Park Tool for bicycle tools and is used under license.

from US$4.86* RRP

TUBELESS RIM TAPE

Width: 29 mm

The tubeless rim tape is extremely user friendly and at the same time very high pressure resistant. Even on road bikes a single ply of tape is sufficient. Only use wheels that have been specifically approved by the manufacturer for Tubeless conversion. Especially with the high-pressure demands on race bikes this is very important. Only the wheel maker’s approval ensures that the rim is up to the particular stresses in operation and the tubeless tire will be secure. All important information and advice about Tubeless can be found at: www.schwalbetires.com/tubeless-technology/

from US$37.08* RRP

TUBELESS VALVE

Valve length: 40 mm

The Tubeless Valves are available in the stem lengths of 40mm, 60mm, 100mm and are a breeze to fit. There is a suitable valve solution for every rim depth. The valve base can be securely mounted in the rim with a key(4mm) without over tightening. The shortened cone ensures a low installation height and thus more space for the the tire beads. Thanks to the large valve inner diameter (4mm), the tire can be inflated with air and sealing fluid particularly effectively.

from US$29.87* RRP

DOC BLUE PROFESSIONAL 60ML

IDEALLY SUITED FOR TUBELESS CONVERSIONS. Produced by the tubeless specialists from Stan’s NoTubes! Doc Blue Professional is our recommendation for use with Schwalbe TLE tires and guarantees easy handling and optimum, fastest sealing.60-ml-BottleHOW TO USE For preventive puncture protection and tubeless conversion. Filling quantities: tires from 23 - 60 mm -> 60 - 90 ml / tire, from 62 -100 mm -> 90 -120 ml / tire. Shake well! Effective up to 7 months. Unsuitable for significant defects (cuts/bursts). Tubeless conversion only with wheels and tires suitable for tubeless applications.

from US$9.50* RRP

EASY FIT 50ML

Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply - without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes!

from US$7.87* RRP

TIRE BOOSTER

With the TIRE BOOSTER, tubeless tire assembly can be accomplished easily. Even without a compressor. With a power of up to eleven bar every tire immediately seats itself safely on the rim and K275:L277seals everything evenly. If you need an even bigger flow of air, a special adapter is also available. The 435 g light, handy cylinder is the perfect remedy for every tubeless tire assembly, whether at home or on your trips.Only for SV valves.

from US$100.94* RRP

Tire Levers

Makes changing tires a snap. The new shape and surface of the tire lever makes the assembly and disassembly of a tire more enjoyable. For both tires and hands too!The new tire levers are especially helpful in difficult assembly operations. Clip it onto the rim, to fix the already mounted section of the tire, and it won‘t slide out when the last section is levered onto the rim.Patent PendingThe colour blue is a trademark of Park Tool for bicycle tools and is used under license.

from US$4.86* RRP

TUBELESS RIM TAPE

Width: 29 mm

The tubeless rim tape is extremely user friendly and at the same time very high pressure resistant. Even on road bikes a single ply of tape is sufficient. Only use wheels that have been specifically approved by the manufacturer for Tubeless conversion. Especially with the high-pressure demands on race bikes this is very important. Only the wheel maker’s approval ensures that the rim is up to the particular stresses in operation and the tubeless tire will be secure. All important information and advice about Tubeless can be found at: www.schwalbetires.com/tubeless-technology/

from US$37.08* RRP

TUBELESS VALVE

Valve length: 40 mm

The Tubeless Valves are available in the stem lengths of 40mm, 60mm, 100mm and are a breeze to fit. There is a suitable valve solution for every rim depth. The valve base can be securely mounted in the rim with a key(4mm) without over tightening. The shortened cone ensures a low installation height and thus more space for the the tire beads. Thanks to the large valve inner diameter (4mm), the tire can be inflated with air and sealing fluid particularly effectively.

from US$29.87* RRP

DOC BLUE PROFESSIONAL 60ML

IDEALLY SUITED FOR TUBELESS CONVERSIONS. Produced by the tubeless specialists from Stan’s NoTubes! Doc Blue Professional is our recommendation for use with Schwalbe TLE tires and guarantees easy handling and optimum, fastest sealing.60-ml-BottleHOW TO USE For preventive puncture protection and tubeless conversion. Filling quantities: tires from 23 - 60 mm -> 60 - 90 ml / tire, from 62 -100 mm -> 90 -120 ml / tire. Shake well! Effective up to 7 months. Unsuitable for significant defects (cuts/bursts). Tubeless conversion only with wheels and tires suitable for tubeless applications.

from US$9.50* RRP

EASY FIT 50ML

Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply - without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes!

from US$7.87* RRP

TIRE BOOSTER

With the TIRE BOOSTER, tubeless tire assembly can be accomplished easily. Even without a compressor. With a power of up to eleven bar every tire immediately seats itself safely on the rim and K275:L277seals everything evenly. If you need an even bigger flow of air, a special adapter is also available. The 435 g light, handy cylinder is the perfect remedy for every tubeless tire assembly, whether at home or on your trips.Only for SV valves.

from US$100.94* RRP

Tire Levers

Makes changing tires a snap. The new shape and surface of the tire lever makes the assembly and disassembly of a tire more enjoyable. For both tires and hands too!The new tire levers are especially helpful in difficult assembly operations. Clip it onto the rim, to fix the already mounted section of the tire, and it won‘t slide out when the last section is levered onto the rim.Patent PendingThe colour blue is a trademark of Park Tool for bicycle tools and is used under license.

from US$4.86* RRP

X-One RS

Features

ADDIX Race Compound

Evolution Line

V-Guard

Tubeless Technology

Super Race